atcomsystems.ca/forum
Posted By: vmguy Partner Key-To-Hybrid Code - 05/14/01 02:02 PM
Anybody know the programming code to convert a Partner system (I have both an ACS 3.0 and an Endeavor) from Key to Hybrid mode? These are lab systems and won't be hooked to the PSTN.

Thanks

vmguy
Posted By: dtmf Re: Partner Key-To-Hybrid Code - 05/14/01 03:30 PM
Just give me a e-mail or call.Thats a Lucent guarded secret.
dtmf

[This message has been edited by dtmf (edited 05-14-2001).]
Posted By: DrPbx Re: Partner Key-To-Hybrid Code - 05/14/01 03:39 PM
Hey, I have that code also but I was wondering if Partner ACS ststems are ordered in Pool mode, or are they always changed by the installer??
Posted By: dtmf Re: Partner Key-To-Hybrid Code - 05/14/01 05:23 PM
DrPbx
No they come in Key mode (which is default)
the installer has to change it.
Posted By: fire692 Re: Partner Key-To-Hybrid Code - 07/18/05 03:29 PM
Great site and forums,

I have an ACS 3.0 switch that one of my offices just acquired and I would like this information on the switching to Hybrid.

I've been able to do this on a 4.1 in the past but would like to know whom I can contact to get this information.

Thanks,
Scott Mehaffey
Posted By: hbiss Re: Partner Key-To-Hybrid Code - 07/18/05 06:08 PM
I believe it's now in the R7.0 documentation. (Available on the Avaya site) Don't think it's so closely guarded.

-Hal
Posted By: dtmf Re: Partner Key-To-Hybrid Code - 07/18/05 06:19 PM
Yes the mode change is now in the manual as of R7.
© Sundance Phone System Forums - VOIP & Cloud Phone Help