Hello - I have an AT&T Definity 7406 Plus model telephone at work and I don't know how to get it to redial or how to save phone numbers for speed dial. Please HELP!
Thanks,
Load

To program or reprogram an AD button
NOTE: AD buttons must first be assigned by your system manager.
1 On a separate sheet of paper, write down the outside numbers, extensions, and/or feature codes you want to program.
NOTE: Each AD button will hold one complete phone number or feature code.
2 Press [Program]
or dial the Program code *0.

[dial tone]
3 Press [AD xxxxx] to be programmed.

[dial tone]
(Press [Shift] first if the [AD xxxxx] is top-labeled on a 2-level button.)
4 Dial the outside number, extension, or feature code you want to store (up to 24 digits).
NOTE: If you are programming an outside number, be sure to include a trunk code, if applicable.
5 Press [#].

[confirmation tone]
* The number is stored.
6 Repeat Steps 3 through 5 to program additional buttons.
7 Hang up or press [Drop] to end programming.