Are there any tricks to renumbering on a Merlin Magix using the extension range of 800-999? It keeps rejecting the 800 as a starting # after I have save the old numbers to 7100.
I have not worked on a Magic, but on the Legend the 800 numbers are used for the trunks. So you may be trying to renumber a hard coded entity in the switch.
Do a print out of the system. This should help identify the problem area.
good luck,
2wire
Renumber everything in the 800 range, which is 800 (the Listed Directory Number), 801-880 (Lines), 881-888 (Park Codes), 889 (Remote Access), and 890-899 (Pools) to their equivelants in the 600 range. Then you will be able to renumber into the 800's.
You will have to be in KEY mode to renumber using 9XX
Sorry, I should not have used the words "hard coded" and said default instead. I knew what I meant, but I could see how it could be misleading.
2wire
the renumber is complete and seems to be working. Thanks for your help