atcomsystems.ca/forum
Posted By: NetAdmin2004 Partner ACS Programming Help - 11/10/04 06:44 AM
I need help trying to figure out how to manage a Avaya ACS Partner R5 system using the PC and Software. Is there a default IP address on the system I can try using to connect to? Any help or links to more docs on this would be a huge help. Thank You in advance.......
Posted By: dtmf Re: Partner ACS Programming Help - 11/10/04 06:49 AM
It's all on the avaya site , you can even get the software, there is docs that tell you how to set it up and use it.
Posted By: NetAdmin2004 Re: Partner ACS Programming Help - 11/10/04 07:24 AM
Is there a cable I need for the COM port? Does anyone have the pinouts?
Posted By: nectec Re: Partner ACS Programming Help - 11/10/04 08:02 AM
You need Partner ACS PC Administration software, and the acs processor has to have remote access card and be configured for remote administration,including remote access password. This software is also used for a local connection using a station port to connect your pc with a modem to.
Posted By: Station Specialties Re: Partner ACS Programming Help - 11/11/04 02:49 PM
Then txfr to ex 76. Password must be a name
© Sundance Phone System Forums - VOIP & Cloud Phone Help