I am having a problem with WinSpm 8. It says it cannot see a 400 TTR card in the system. I go into standard SPM and it can read it just fine.
go to 9 and see if you have the problem still.
When upgrading to Merlin Magix- 400 cards, ATL cards and early non-upgradeable 408MLX cards need to be checked by Comcode to see if they can be used. The system will work but SPM quick access will not. These cards are no longer supported and should be removed and a board renumber done. See Avaya document CIB 3214 Comcode700018682