Is there a way to force a login or password on the admin port. All the documentation I have read says no password required when connected to the admin port. Or is there a way to disable the port and enable when needed. Acually I would never disable the port, but I would like to force a password for local security reasons.

Thanks,

2wire

There is no way to force a password for a direct connection

Lock the door

Change the console programming port to a non-programming phone. Add a username and password to WinSPM. Change the remote programming password. Good luck.

Thanks for the replys. I did not think there was a way, but I thought I would ask. I have a cowboy in a remote office who thinks he knows it all, and I am trying to prevent possible problems.

I guess I will warn his manager about unauthorized access to the equipment.

Thanks,

2wire