Have a phone that won't do much of anything, if I dial an internal extension I get a reorder tone. The digits on the display won't "clear off" after picking up and replacing the handset. I have also made changes to the buttons but they don't appear on the display. All of the other phones on the switch seem to be working fine. This port had a phone on it in the past but was just hooked back up.

what does a 'stat stat XXXX' show? It sounds like you have an x port and you just need to TTI it in or assign a digital port to it.

It was a combination of TTI, send all calls being turned on before the physical phone moved, and the wrong records on the port. I X'ed it out on the station and TTI'ed it onto the correct port.

Thanks