sundance-communications.com
Posted By: qoscs Partner ringing over paging - 11/03/08 09:27 AM
Hello,

I have a Partner ACS which is hooked up to a Valcom V2001-a for loudspeaker paging. I am using to page port on the Partner as the output to the Valcom.

I am looking to have the incoming co lines ring over the loudspeakers. I have 6 station phones, which all have the same 3 CO lines assigned to them.

Is this something I can do using my current configuration? Or would my best bet be to purchase an "audible ringer" such as the Valcom V-9924C and connect it to an available station port?

Thank you,
Kevin
Posted By: hbiss Re: Partner ringing over paging - 11/03/08 11:24 AM
Read your Valcom documentation. The V2001 has a night ringer built in. Program a spare station port for the lines you want to have ringing on then connect T/R from that port to the V2001.

-Hal
Posted By: qoscs Re: Partner ringing over paging - 11/03/08 12:16 PM
Thank you Hal!

Can this be a digital station port? I'm working with a Partner ACS, 3x8 module.


Kevin
Posted By: hbiss Re: Partner ringing over paging - 11/03/08 12:48 PM
There are no digital station ports on a Partner.

-Hal
Posted By: qoscs Re: Partner ringing over paging - 11/03/08 01:45 PM
So all 8 station ports are analog? I usually work with Nortel and NEC, so I was unaware of that fact.

So just to be clear, wire t/r from a spare station port to the valcom 2001a una ringing input?

kevin
Posted By: hbiss Re: Partner ringing over paging - 11/03/08 01:50 PM
You got it.

-Hal
Posted By: qoscs Re: Partner ringing over paging - 11/03/08 01:56 PM
Thanks a million!

Kevin
© Business Phone System Forums