atcomsystems.ca/forum
Posted By: 6string Partner ACS R7 - 11/21/08 05:12 PM
Customer has a Partner ACS R7 and a Partner Messaging card in a 2 slot carrier. They want to connect 4 single line cordless phones for everyday use. The avaya docs. are telling me there are only 2 touch tone receivers in the processor. Do I have any options to add TTR's so I can accomplish this for the customer.

Thanks!
Posted By: Touch Tone Tommy Re: Partner ACS R7 - 11/21/08 05:42 PM
They will work just fine!

The TTR's are a shared resource on the system. It is unlikely that all 4 will go off hook and start dialing at the same time.
Posted By: 6string Re: Partner ACS R7 - 11/21/08 05:49 PM
If I'm understanding the documentation correctly the TTR's are only used when the dialing is accomplished, not for the duration of the call. In this case I think this application will work unless they all try to make a call at the same time. Is this correct? Would the 4 port Partner Messaging have any TTR's for analog T/R use?
Thanks!
Posted By: 6string Re: Partner ACS R7 - 11/21/08 05:51 PM
Thanks TTT. I must have been typing while you replied. Any suggestions for adding TTR's if the issue arrises in the future?
Posted By: Touch Tone Tommy Re: Partner ACS R7 - 11/21/08 06:14 PM
Just add some 206 or 308 cards
© Sundance Phone System Forums - VOIP & Cloud Phone Help