atcomsystems.ca/forum
Posted By: vance Magix PRI and DMS-100 - 12/06/08 05:21 PM
I know this discussion has been delt with before....I've been dealing with Embarq For 2 weeks Now with this D-Channel being Locked Out and Finally..They have fixed the Problem..I am going to turn-up this PRI on Wed. What is the Correct Protocal for the DMS-100 ?? They don't seem to have a 5ESS or know what ATT Custom is..
NTNAPRI and U-459 are the Protocals they are Suggesting ...HELP ???
Posted By: mdaniel Re: Magix PRI and DMS-100 - 12/06/08 05:30 PM
PRI on Magix likes NI1.

Good Luck.
Posted By: dagwoodsystems Re: Magix PRI and DMS-100 - 12/06/08 07:35 PM
Custom means "AT&T Custom", not NI-1. For DMS-100/250, have the tech set the LT_DEF variable to U-459 (a Line Type Definition of U-459 is AT&T custom). I don't know why this is so misunderstood by Class 5 switch admins.

Do not use 5ESS emulation. Steer clear of NTNAPRI unless you own a Nortel brand PBX.
Posted By: vance Re: Magix PRI and DMS-100 - 12/09/08 07:00 PM
O.K. U-459 it is...DID's work inbound..I will Turn this Bad Boy Up this comming Monday..Thanks So much
Posted By: vad60 Re: Magix PRI and DMS-100 - 12/10/08 05:18 AM
Vance,
Inbound is no big deal. The most important Outbound
calls. More complicated.
Posted By: vance Re: Magix PRI and DMS-100 - 12/11/08 05:27 AM
Oh...(Inbound).. No Problem.Been there Done That..I have everything ready to go.. Porting over Main Numbers on Monday..Thanks
Posted By: vance Re: Magix PRI and DMS-100 - 12/15/08 04:41 PM
OK..
Turn-up went very well..Caller I.D. was an issue with the Carrier,but we sorted it out..U-459 worked... Thank You for all your help..
© Sundance Phone System Forums - VOIP & Cloud Phone Help