atcomsystems.ca/forum
Posted By: Pinecreekboy How do I update telephone exchanges IPO - 04/04/11 11:32 AM
We have several IPOs running either 3.2, 4.2 or 6.0 and it has come to my attention that the list of local exchanges in the switches hasn't been updated in years. After looking through the software I couldn't see where I can do this.

Your help is greatly appreciated.
Terry
Posted By: mongo5150 Re: How do I update telephone exchanges IPO - 04/04/11 02:52 PM
Are you routing calls based on the exchange? I am unsure as to what you are asking. You dont have to update anything regarding exchanges, that I am aware of....
Posted By: mforrence Re: How do I update telephone exchanges IPO - 04/05/11 04:46 PM
I agree with Mongo5150 - unusual to have exchanges listed. If they were, it would be in ARS in the newer systems, LCR in the older ones.
Mike
Posted By: Pinecreekboy Re: How do I update telephone exchanges IPO - 04/11/11 10:17 AM
Sorry for the long time to reply I got waylaid on an unexpected project.

We restrict most of the extensions to local calls only. So somewhere in the switch there needs to be a table that lists what are local calls.

Thanks,
Terry
Posted By: mforrence Re: How do I update telephone exchanges IPO - 04/12/11 03:15 AM
I suppose we're just fortunate that toll calls require a leading '1'. It would be very difficult to keep current on all local exchanges, especially in a metropolitan area.
Mike
© Sundance Business VOIP Telephone Help