atcomsystems.ca/forum
Posted By: B Cannon ACS 5x9 - 11/15/11 08:42 PM
I inherited a customer last week via a cut over for a T-1. System was working fine they said before I did the cut. Afterwards the paging did not work. They had a button on each phone labeled speaker. Now when you press the button you get a dial done (can't make a out bound call) instead of being able to use the paging. I have reviewed the system and tried moving a couple of things around but it still doesn’t page. What might I have done wrong???
Posted By: upstateny Re: ACS 5x9 - 11/16/11 02:28 AM
What does the system show is programmed on that button?
Posted By: Touch Tone Tommy Re: ACS 5x9 - 11/16/11 06:07 AM
The system uses a line port programmed as the page port to interface to the loudspeakers. What does #617 say? That will be the line port to use.
Posted By: B Cannon Re: ACS 5x9 - 11/16/11 09:32 PM
I will check it out in the AM Thanks
© Sundance Phone System Forums - VOIP & Cloud Phone Help