low volume on 302C console - 11/14/19 09:07 PM
Definity Sys 85 G3 that has very low volume on outside calls.
Is it possible that there is an issue with my circuit. Maybe just a coincidence but I did an upgrade on the IP flex circuit about 2 months ago just to get more data bandwidth . PRI voice side should have stayed the same. In house calls have no problem but there is a very noticeable drop in volume on the IC and outbound calls. I even swapped out the console at first since she was the one complaining. Checking into it a bit further and all our Digital sets, (7406+) are very low volume also. Before I (try) to get AT&T to look into the problem on their side I just wanted to make sure I haven't overlooked something her. Only thing I see in the switch is setting on the DS1 card for IBSO db? changed it form 24 to 36 but made no difference. Swapped out tn754 cards also no change.
Is it possible that there is an issue with my circuit. Maybe just a coincidence but I did an upgrade on the IP flex circuit about 2 months ago just to get more data bandwidth . PRI voice side should have stayed the same. In house calls have no problem but there is a very noticeable drop in volume on the IC and outbound calls. I even swapped out the console at first since she was the one complaining. Checking into it a bit further and all our Digital sets, (7406+) are very low volume also. Before I (try) to get AT&T to look into the problem on their side I just wanted to make sure I haven't overlooked something her. Only thing I see in the switch is setting on the DS1 card for IBSO db? changed it form 24 to 36 but made no difference. Swapped out tn754 cards also no change.