atcomsystems.ca/forum
Posted By: sentrex1 outbound calls - 05/11/20 01:40 PM
On vvx 150,301 models when dialing out i have to push the send button,is there a setting that can bypass that button and have calls dial out automaticaly??
Posted By: Carl Navarro Re: outbound calls - 05/11/20 02:07 PM
You may be able to set the end of dial timeout to something less than what it currently is, use the # key, or modify your dial plan to route calls faster.

Carl
Posted By: sentrex1 Re: outbound calls - 05/11/20 11:30 PM
I copied and pasted a couple of rules but to no avail i do have to hit the send button.
would you have a rule for this that works?
al
Posted By: hitechcomm Re: outbound calls - 05/12/20 03:18 AM
The Hosting company can change that. New Hosted systems have all corrected that problem. It's not only Polycom phones that had that problem .
Posted By: sentrex1 Re: outbound calls - 05/12/20 05:45 PM
I went on the poly community got my answer
i installed a digit in my digitmap tand it works heres my digitmap
[1-8]xx[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT|**x.T|+x.T
© Sundance Phone System Forums - VOIP & Cloud Phone Help