atcomsystems.ca/forum
Posted By: draynor SBX flash button - 10/21/11 01:21 PM
Trying to set up my first SBX system. Customer has call waiting. The manual says every 24 button phone has a flash button. NOT. If I mash co 3 that is not being used, a flash button appears as a soft key at far left. If I'm on a call on co 1, I get the beep, but no flash button.

Anybody got any suggestions.

David
Posted By: Ted Re: SBX flash button - 10/21/11 03:14 PM
The flexible code is 551. It's in the Install manual page 6-13
Posted By: draynor Re: SBX flash button - 10/25/11 08:54 PM
Ted, thanks for your reply but your info was for a single line set, not for a digital set. I found the flash key

David
Posted By: Ted Re: SBX flash button - 10/26/11 01:09 PM
Hi David, I sold my bench unit and was just reading from the manual. Must have read it wrong. Sorry. That said, where did you find the flash key?
thanks, ted
Posted By: Derrick Re: SBX flash button - 10/26/11 02:57 PM
Flash code for flex button is trans/pgm 94 so sequence is hit trans/pgm press the flex button then trans/pgm 94 then hit hold/save.
Posted By: draynor Re: SBX flash button - 10/26/11 08:34 PM
Ted, while on a call & you hear a beep, your display will show an arrow for the right button. Press the round button at bottom of phone & the flash button will appear on the LCD. Now you can hit the flash key to answer call waiting.
Posted By: Ted Re: SBX flash button - 10/27/11 12:02 PM
Thanks guys. I haven't had an occasion to use it, but it's nice to know how when the time comes.
© Sundance Phone System Forums - VOIP & Cloud Phone Help