MBX with a PRI. I notice that in the conversion table is a prompt for day/night/timed. How do I get the DID that is the main number to route to an announcement and CCR table when the system is in night? Is there a way to program a flex key for the operator to put the system manually in night? Thanks guys!
I can only guess...pgm 251.
You pick a table say 2 (leave 1 for day) and a bin 001
You pick follow DNT.
you enter the DID number (did dialed digits)
You enter the DID name if desired.
You choose a DNT time table index say 2
You apply the option which would be the CCR...001 for example enter them then save.
pgm 253
choose time table 2 and set ring mode for night.
To modify Day/Timed/Night Ring Mode manually (Attendant Only):
1. Press the [PGM] button.
2. Dial 0 8 1 {Day/Night Program code}.
3. Select Tenant Number (0=All, or 1-9).
4. Select Ring mode (0=AUTO, 1=DAY, 2:=NIGHT, 3=TIMED).
Like I said its only a guess.
Thanks Derrick!Used the digit conversion table, used follow DNT,entered DID number,didn't have to use the time table index(since night service will be used manually)Entered the oper. ext. for day and the CCR code plus announcement number for night. Worked like a champ! Thanks again!