atcomsystems.ca/forum
I'm hoping there is a gain setting for the all call page (voice) audio level, is it P406?
The page warning tone is very loud and keeps my customer unhappy with this system.

So pages precede with the tone blast then voices like a whisper.
I recall I tried setting the page warning tone time to 0mm from 100ms then had no page audio at all.

Any advice appreciated.

Summit 80
Assuming you haven't changed anything in P408, I would call Tech Service. P168 has port allocations. Not sure what that means, but I see it. Another check might be to see if something is shunting it. Take all the phones down except for two and try it then. I have not experienced your problem, but that's what Tech Support often says. Good Luck.
© Sundance Phone System Forums - VOIP & Cloud Phone Help