We need to take a client's SX-200 down to rpelace some bad cards and ports, but we must be able to set the clock on the system when we put it back online. the client cannot find the manual to tell us how to set the date/time.
We need help ASAP
To set clock time:
a) dial *5
b) dial time (2-digit hour plus 2-digit minutes)
c) dial * for p.m., otherwise a.m.
d) press release
To change the date:
a) dial *15 and 3- or 4-digit date (1- or 2-digit month, 2-digit day)
b) press release
If possible, you might want to get a database printout.
a) dial *190
b) press release
Hope this helps
The Dr is right on the time however on the date it is
*15
then its 2 digit month IE: 01 = Jan
2 digit day
and on newer revs of 217 the 2 digit year