atcomsystems.ca/forum
Posted By: dtmf SX50 - 09/03/03 10:26 AM
any body have the SX50 install and program manual I have the SX20 and the SX100-200, can i use them or do I need the SX50?
Thanks
russ
Posted By: Tip&Ring Re: SX50 - 09/03/03 04:46 PM
The SX50 is a unique system although it has programming like the SX-20.

I have the CD but it uses Folio Views and will not work on a PC with NT,W2000 or XP

Let me know if you need it.

DJ
Posted By: dtmf Re: SX50 - 09/03/03 05:03 PM
So if I use the sx-20 for programming I will be fine? Is it something you can e-mail? If so I would be interested in looking at it.
Thanks
russ

[This message has been edited by dtmf (edited September 03, 2003).]
Posted By: mpoe Re: SX50 - 09/03/03 07:36 PM
What version 50 is it? The registers are not the same

[This message has been edited by mpoe (edited September 03, 2003).]
Posted By: dtmf Re: SX50 - 09/03/03 07:41 PM
Going to site in the morning I'll let you know, we are going to move them to a new location and then change some programming for them.
© Sundance Business VOIP Telephone Help