trying to help out a scout camp with their sx100, want to do a complete default and start over, system seems to have some ghosts.

it's been a while!!

I have the manuals here for generic 216 and 217. What do you have? Do you have the console overlay and a console?
mark

What is your software level? 216 or 217? 216 would have 2 cpu type cards. 217 would just have 1. Reset to default involves the scanner card & a console.

software is 217, i have the system on my bench, overlay & console.

Set the thumbwheel switches on the tone control card to X=the console you are using (0-1-2) I think 0 is the maintenence port.
Press lamp test
press next
set the thumbwheel to
press config/init
press enter
press reset button on the scanner card
system is reset and removed from the programming mode

you are now at ground zero.
mark



[This message has been edited by markk (edited August 10, 2004).]