Has anyone hooked up a remote modem to a 200ICP CX? We are having a hard time talking between modems. Edoc's says one thing, Tech Handbook says something else. What is a DTE straight cable? Pin outs?

Thanks

Sorry, not familiar with your switch, but follow the link to answer your cable question.

https://www.aggsoft.com/rs232-pinout-cable/pinout-and-signal.htm

I did it on a 200 ICP MX. Make sure you set the modem to use no flow control.

Also make sure you are using a null modem cable or adapter between the port and the modem.

Thanks johnp, Got it to work.