Hi, is it possible to assign a static IP to a 5207?
I have tried holding down numerous buttons whilst rebooting the phone, but I can't get into any sort of menu.

Thanks,
Eugene

1. Ensure that the set is not on the network and powered down.
2. Hold down the Volume Up key for 3 seconds and at the same time, plug the Ethernet cable into the set to power up.
3. Release the Volume Up button after "STATIC IP SETUP MODE" appears.
4. Press # to begin entering static IP information.

Rich

If that does not work for for you , turn to page 58 of the 3300 quick reference guide .