atcomsystems.ca/forum
Posted By: Mike P. xs-200 icp with 2 asu - 07/14/06 04:43 PM
hi folks ,
i m trying to install a new sx-200 icp at one of my customer no since he needs 120 extensions i have to use 2 asu units.This is for the first time that i will be using 2 ASU units,can anyone help with the programming of these 2 ASU.Also since i have 2 ASU units i will need additional CIM module. Now after installing this new quad cim module in controller can i still use the original 2 cim ports provided with the controller. Will appreciate ur help thanks
Posted By: johnp Re: xs-200 icp with 2 asu - 07/14/06 05:33 PM
The ASUs hook up to the embedded cim ports. As for needing the ASUs to get to 120 extensions, you got me there. The MX controller supports 248 IP Phones. To program the ASUs make sure that the cims aren't assigned to bays in form 53, and assign them in form 1 to slots 14 & 15 of the ip bay.

Oh now I see you are talking about a total 0f 120 analog. How is your per node setup?
Posted By: OBTW Re: xs-200 icp with 2 asu - 07/15/06 04:24 AM
johnp
luv your pic
Posted By: johnp Re: xs-200 icp with 2 asu - 07/15/06 04:56 AM
Thanks,

I thought I'd make this place kid safe with a little "Nick at night" smile
Posted By: OBTW Re: xs-200 icp with 2 asu - 07/15/06 06:28 AM
I gotta get that Y key fixed !
© Sundance Phone System Forums - VOIP & Cloud Phone Help