SX 50 Change night ringing to new ext. number - 08/31/07 09:26 AM
Need to change SX 50 to a new ext. have lost the the page on it and many more programming features :confused:
Re: SX 50 Change night ringing to new ext. number - 08/31/07 02:57 PM
Trunk programming - command 501 through 580 (depending on where your trunk cards reside) register 5 - set bit B to 0 then bits C, D, E to equipment number of station you want to be night answer point. Set bit F to 0.
This procedure has to be done for each trunk (of course).
This procedure has to be done for each trunk (of course).
Re: SX 50 Change night ringing to new ext. number - 08/31/07 05:05 PM
Easier, IF you have flexible nights enabled. Push and Hold Night button down. 1st Trunk will show night destination. Type in new Extension. push * OR # , Don't remember which, and trunk number will increment to next programmed trunk. Type in new extension number. Etc, Etc, Etc. You HAVE to hold NIGHT button down with 1 finger during the whole process, not hard to do, just hard to remember! John C. (Not Garand)
Re: SX 50 Change night ringing to new ext. number - 08/31/07 05:36 PM
Or * 21 +TRK# +Ext#
Re: SX 50 Change night ringing to new ext. number - 08/31/07 06:13 PM
True. Funny I never program Flexible night service for hotels. too many chances for people to screw things up.
Re: SX 50 Change night ringing to new ext. number - 09/01/07 05:14 AM
Or the other side, They only change 1 trunk, which is always the last 1 inbound in the hunt group and "There's something wrong with nite ringing, I can't change it" 
John C. (Not Garand)
John C. (Not Garand)
Re: SX 50 Change night ringing to new ext. number - 09/10/07 09:03 AM
Thank you all for the help again thanks