O.K. last question for the week!! And a big thank you to those that have helped me. I have a paper copy of the database from an install I did several months ago. Dane had helped me get it so I would have it to refer back to. I'm done programming the switch I'm installing next week and would like to do the same. I have taken a FTP backup and a Kermit backup. Looked under print options.... just not seeing it must be right in font of me but just can't see it.
THANKS in advance for any help
Randy

in direct to IO From 34 set up cde data print to printer port and then dump your forms out to printer for form 32.

Will give it a shot on Monday
THANKS!
Randy

If you're using on the Maintenance Port or using a Telnet client like Putty, from Form 32 you also use the <Esc>3 or <Esc>9 Display options and capture the data to a text file directly. This works even if you're accessing the system remotely by modem or Telnet.