Hi,
Please advise me of how can i make an dummy extention call forward to a long distance number??
I have created the dummy extention already.
I tried to dial 56 (call forward= Follow me) after dial tone but it gives me busy signals does not allow me to enter the LD phone number.
please help!!! Thanks In Advance To Everyone!!
United States LD or another country?
Call Forward External can only forward to System Speed Dial numbers in an SX50.
Thaks for quick reply.
I need both US LD and International.
Can You please explain how its done to make speed dial and forwarding as well>
Thanks a Bunch!!!
I have received your email. I really appreciate your help. i got it to work now!! thanks much!!!
Our pleasure! Thanks for getting back to us, nice to know when we 'get the job done'!
John C
I would love to know the steps too. Haven't been able to figure this out and don't want to mess with it too much.
Thank you
Alok Shah, check your mail.
I would also like to get the info about call forwarding.
I as well, am trying to program my sx-50 for a call forwarding number. I tried setting up an abbreviated dialing number but for some reason it did not work! So, could I also get that information that you have been emailing to others please!!
If you have the manual, check section 105. Basically, you create a dummy extension that is 'call forward always' using a system abbreviated number. Then anything sent to that extension via C/F or direct transfer will go to the phone number. IF the extension is allowed to C/F, AND unsupervised trunk to trunk connection is allowed.
I was going thru the function keys trying to locate something and now I have EQP-BSY on the display! How can I get that removed? Also, I have a manual for programming but not sure how to get the commands menu..........
Equip-busy: *32 that clears all alarms and busy-outs.
If you have the manual and can't figure out how to get into programming, you probably better back off and get a smidgin of training.
Can I get the same information for a SX-200? I want to be able to have some dial an extention and it rings my cell phone. I have access to the menu to log in and full access to the system.
Check the 'call forwarding' feature in section 105 of the manual.
The call forwarding in the 200 (Which 200?) is somewhat different. Determine which 200 you have and start a new thread. In the Mitel forum just click on 'post new topic', upper right section of any thread in the Mitel forum.
I would also like to get the info about call forwarding. sx-50 to a call center.
Check the 'call forwarding' feature in section 105 of the manual. All the programming to enable it and the user instructions to do it are in there.
Tzmandan, You've got mail.
Thank you already for any Information.
I have it working if somebody calls from a internal extension, but if somebody calls from outside. I think where I am stuck is "unsupervised trunk to trunk connection".
-Marc
I am also looking for detailed instructions on external call forwarding to a tool free number. The external forward and always forward command is not in my book?
I am also looking for help in setting up call forwarding on sx50 to an external off site number. Please help.
The information you need is not just a user manual look up. There are programming items that must be enabled for this to work properly. I highly suggest that you locate a local Mitel dealer in your area and have them visit your site to make sure the programming is enabled for this to work.
Programming details is beyond the scope of this forum.
I am locking this thread as there is no forward going information that can be added.
Rcaman