Mitel 5000 - Gateway Device - 11/11/10 01:30 PM
Trying to find a solution.
We have several locations with Mitel 5000's that are all connected over MPLS.
But our current issue to resolve is:
location 1 has a Mitel 5000
Location 2 has phone's hanging off this Mitel 5000 all running on VOiP.
We now have a need to have numbers from Location 2 to ring at location 2. Location 2 doesn't have any dialtone except one line for 911.
The Telco's are saying that since location 2 is just out of the region of Location 1 that their solution can not have area codes from location 2 ring to location 1's phone system to then go to location 2 via hunt groups.
Can we bring in copper lines and some how use the gateway device to bring them accross on the MPLS from Location 2 to location 1 so that they can then be hunt grouped to users in Location 2?
Thank you,
We have several locations with Mitel 5000's that are all connected over MPLS.
But our current issue to resolve is:
location 1 has a Mitel 5000
Location 2 has phone's hanging off this Mitel 5000 all running on VOiP.
We now have a need to have numbers from Location 2 to ring at location 2. Location 2 doesn't have any dialtone except one line for 911.
The Telco's are saying that since location 2 is just out of the region of Location 1 that their solution can not have area codes from location 2 ring to location 1's phone system to then go to location 2 via hunt groups.
Can we bring in copper lines and some how use the gateway device to bring them accross on the MPLS from Location 2 to location 1 so that they can then be hunt grouped to users in Location 2?
Thank you,