atcomsystems.ca/forum
Posted By: critical For the ignorant - 10/07/11 09:39 AM
I've been asked to work on the chassis shown in the pictures (follow the flikr link below). I don't mind RTFM. I just need to know where to start.

What system is this?
Which manuals do I need?

My first task is to move some line appearances to different sets.

Hope you guys can help.

Thank you

Link to pics

https://www.flickr.com/photos/68386025@N04/sets/72157627714834605/
Posted By: AKroger Re: For the ignorant - 10/07/11 10:01 AM
Link doesnt work
Posted By: fifty5footer Re: For the ignorant - 10/07/11 10:35 AM
That's an SX200 EL System.
You can program that system using the console (SC1000) or by connecting to the 9 pin serial port (labeled 'Maintenance') on the back of the cabinet.
Serial port settings would be 9600, 8N1, using VT100 emulation.
Posted By: critical Re: For the ignorant - 10/07/11 11:16 AM
Thanks guys!

Using that info, I've been looking for manuals. I'm seeing a number of different ones but nothing specific to what I need to accomplish. Do you guys know where to look for the appropriate manuals to move line appearances?

Thanks!
Posted By: telephoneguy Re: For the ignorant - 10/07/11 01:54 PM
Did you try the link to "Manuals" at the top of this page?

It'll be form 9*
Posted By: critical Re: For the ignorant - 10/10/11 06:55 AM
Yes - tried the link to manuals. Would anyone be able to to tell me specifically which manuals to get?

Thanks!
Posted By: Lightning horse Re: For the ignorant - 10/10/11 08:37 AM
Lightware 17-19, for SX200 ML/EL. The Flash card will have the release printed on the label. Do you know which version you have? The manual originally came on a CD.
© Sundance Phone System Forums - VOIP & Cloud Phone Help