I have a SX200 w/ a ELX Stratum 3 controller.What am i looking for for manuals on wedophones? All I find is ML, Gen216, 200 lite, 200 LW. The main thing is can I do basic programming from the console and where can I find the default password? All I 'm trying to do right now is find a port an extension is on. Got lost in a remodel. Thanks
The ML manuals should work for you. On that website I just saw a tech manual for LW19 rev 3.1 which should do it too.
Thanks Steve.I got into the CDE but was having trouble working thru the forms. none of the soft keys were doing what they were suppose to do. Got into form 01 and couldn't do anything.I'll check my emulation settings and try again today.Thanks again for the response.
You need to press 'esc'(escape key)then the softkey number.
i.e. to quit out of a form, you would press 'esc' then '6'.
Thanks fifty5, I knew I was missing something,all I was seeing is >6, so, >,is esc. All I'm trying to do, right now, is find out what port a station is on. All term on 110, if 66 I'd be out by now.
Form 9 is where you would find the port for the extensions.