atcomsystems.ca/forum
Posted By: JustinABIFI Mitel SX-50 Night Mode Help - 12/24/17 09:52 AM
Not to familiar with all the setting but have learn some. But I can't figure this out.
In my hotel the night auditor presses "Night" when walking around the property and takes the cordless phone with her (ext. 455)
The cordless phone will ring with external calls but only the console will ring from internal (guest room) calls.

How can I make both internal and external calls ring the cordless?
Posted By: oobie Re: Mitel SX-50 Night Mode Help - 12/27/17 01:29 PM
Not familiar with the Mitel but you would more than likely need to activate some call forwarding for the console phone to forward calls to the cordless.
When in Night mode the system is probably set to ring the cordless and thats why internal calls are not forwarding.

I'm sure someone else will chime in hear.
Posted By: westerntelephone Re: Mitel SX-50 Night Mode Help - 12/29/17 05:28 PM
Command 100, register 08, field f.
Posted By: JustinABIFI Re: Mitel SX-50 Night Mode Help - 01/06/18 03:08 AM
Did command 100, register 08, field f and all the calls on night service go to cordless like we want. But my night bells are gone. Is there a way to have bells ring during day mode and night mode and have cordless working at night?
Posted By: westerntelephone Re: Mitel SX-50 Night Mode Help - 01/12/18 02:03 PM
For each trunk, (501-580), depending on which hardware location, Command 501-580 register 4, d=0 (day answer mode is direct in line), efg=000 (night bell),eg, a trunk card in slot 10 would make trunk 1= 573, 2=574, etc.
© Sundance Phone System Forums - VOIP & Cloud Phone Help