Mitel 5000 call box calling beeper - 06/22/18 05:50 PM
I have a Mitel 5000 recently switched to SIP trunks. They have a Viking analog call box configured as a house phone. The call box is supposed to call an outside number, pause, then send an extension number. The phone number configured in the house phone is 8 plus the number, followed by a pause then an extension number followed by # (8xxxxxxxxxxP183#) This worked with the POTS lines. But now when the call goes out it is sending the phone number plus extension number in the SIP INVITE and a message comes back that the number is not recognized. If I remove the extension number, the call goes through, but unfortunately the beeper requires a number or it will not beep. I've tried entering a 1 before the number, I've also inserted a # after the number followed by a pause then the extension number - call goes through but the extension number does not.
Anybody have any idea on how to get this to work?
Thanks.
Anybody have any idea on how to get this to work?
Thanks.