atcomsystems.ca/forum
Posted By: Barrontel SX200 ICP & ASU Bad ports - 03/02/21 03:15 AM
Hey All,
I just got back from a new customer, they tell me that some time ago they had a lightning strike, I found some bad ports on the ASU, I can move the rooms to spare extensions but can’t change the extension numbers to match the rooms because the PBX sees the old bad extensions as in use.

Any ideas?
Posted By: nortelvoip Re: SX200 ICP & ASU Bad ports - 03/02/21 03:43 PM
Will it let you busy out the ports in maintenance?
Posted By: Steve Layton Re: SX200 ICP & ASU Bad ports - 03/02/21 06:38 PM
Try powering down the ASU and then make the changes.
Posted By: Barrontel Re: SX200 ICP & ASU Bad ports - 03/03/21 01:55 AM
Thanks for the replies, I’m ordering a replacement ASU tomorrow and hopefully the problem will resolve itself that way but I will try your suggestions before I swap it out just to see if that works, I thought I tried that but I can’t swear to it
Posted By: backenhiemer Re: SX200 ICP & ASU Bad ports - 03/05/21 10:34 AM
Pull the card out make the changes put it back in
© Sundance Phone System Forums - VOIP & Cloud Phone Help