I have just changed out a PRI on a 384i to CO Loop Start Line Cards with Caller ID Daughterboards. Caller ID is coming from Telco and I have gone through all programming for Caller ID and system is not waiting for caller id and ringing system. Any idea what I have missed in programming?

I assume since you went through all of the caller ID programmng , all entries in 0406 are set. (Also assuming that it was working before?)

SInce the only thing that has changed is the trunks I would look at 0921:2

The only other thing I can suggest would be the daughter boards or some obscure settings in 0135.

I have a 124i out there that I can't get 2 boards to work but the 3rd passes CID with no problem