atcomsystems.ca/forum
Posted By: DrPbx F986 problems - 08/16/04 12:01 PM
I have a customer that has a problem using the direct to VM feature. It will sometime just keep the call on hold & not go to the mailbox. If I reset the phone it seems to work for a while, then quit after I leave.
Using a button programmed as F986 works the same as just pressing F986. The is a Norstar MICS w/ a NAM. Any thoughts would be helpful.
I haven't done a reset. I was called because the current vender couldn't fix this same problem.
Posted By: wmthoma Re: F986 problems - 08/16/04 02:56 PM
Quote
<font face="Verdana, Arial" size="2">Originally posted by DrPbx:
I have a customer that has a problem using the direct to VM feature. It will sometime just keep the call on hold & not go to the mailbox. If I reset the phone it seems to work for a while, then quit after I leave.
Using a button programmed as F986 works the same as just pressing F986. The is a Norstar MICS w/ a NAM. Any thoughts would be helpful.
I haven't done a reset. I was called because the current vender couldn't fix this same problem.
</font>

How many intercom paths do you have? you will need at least 2.
Posted By: DrPbx Re: F986 problems - 08/16/04 03:29 PM
I will check.
Thank you.
© Sundance Phone System Forums - VOIP & Cloud Phone Help