I've been asked to add a T-1 to an MICS v6.1.
Is ESF-B8ZS w/wink the config I am looking for. Also are there any conflicting numbers I should worry about on incoming DID's or can I convert any incoming number. Are there any other things I should watch out for?
Thanks in advanced.


------------------
Bound to cover,
Just a little more ground.

you're good with that setup. if you need help email me. your station numbers don't even have to match your did's. you set your target lines to accept the did and route to whatever extension. multiple extensions can receive multiple did's. actually pretty nice.

Thanks for the support. Incomming DID to multiple staions is a nice feature, I usually have to setup a virtual & place it on different stations. GOOOOOOOO Nortel!

------------------
Bound to cover,
Just a little more ground.

I know I have to program the target lines, but do they have to appear on the phone? Or will they ring to the ICM button.

------------------
Bound to cover,
just a little more ground.

Target lines can be programmed to ring only, appear & ring, or appear only.

Whatever you want!

------------------
North Florida Communications