atcomsystems.ca/forum
Posted By: lloydainey ATA - 10/27/04 10:28 AM
Trying to get an analog fax machine to use the ATA as an extension on the system.

A station set works in the jack...but the fax will not work trough the ATA to the tlephone system to get an outgoing line...any suggestions

------------------
Posted By: Jack Damage Re: ATA - 10/27/04 03:28 PM
Is the fax machine dialing "9" or whatever the line pool code is?


You could also try tapping into the ATA with your test set while it makes the call to see what tones are happening or at what point the call fails. A little eavesdropping can go a long way.

[This message has been edited by Jack Damage (edited October 27, 2004).]
Posted By: Jeffkoeh Re: ATA - 11/12/04 01:25 PM
Set up Rte 001: Use Pool A, dial out none

Destination Code 8: Use Rte 001

Hotline on ATA Ext: External# 8 Use Rte Table

This will pick up a line on Pool A when the phone is taken off hook
© Sundance Phone System Forums - VOIP & Cloud Phone Help