Change DN - 02/03/05 10:23 PM
How do you change a set 's DN from
291 to 327 ?
Bug
MCIS4 using M7324 to program.
291 to 327 ?
Bug
MCIS4 using M7324 to program.
Re: Change DN - 02/04/05 04:01 AM
Go into programming. There is a option for change DN. I cannoy remeber exactly where it is of the top of my head, but if you are able to get around in programming you will find it.
If you are looking at just flip flopping two extensions? Use set relocation or do at MDF.
Good Luck!!
If you are looking at just flip flopping two extensions? Use set relocation or do at MDF.
Good Luck!!
Re: Change DN - 02/04/05 07:08 AM
Look under "System Programming", "Change DN'S"
Re: Change DN - 02/04/05 10:37 AM
Just looking to make extention 291, 327 :P
Lzrman
Thanks![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/forum/smile.gif)
!
Lzrman
Thanks
!
Re: Change DN - 02/04/05 11:43 AM
Under 6.1 s/w - Go under System programming. Then find the heading CHANGE DN. You will first want to make sure that nobody is using x327. It will ask you to enter OLD DN (291) then it will ask for NEW DN (327) That should do it.
Re: Change DN - 02/07/05 07:04 AM
If you have an ext you want to change with, do it on the MDF and don't use set relocation or change DNs unless it is a temp
thing. You can, after a long period of doing this, start to lose DN Ports and other strange things with a VM (NAM) attached.
thing. You can, after a long period of doing this, start to lose DN Ports and other strange things with a VM (NAM) attached.