I have a customer who's getting ready to order a PRI for their MICS, and they had a couple questions the telco was asking that I couldn't find the answer to. I only had best guess, and I need to get the right answer.

1. Is outpulsing DTMF? (My guess is yes, as that's how it's been for other PRI's I've done.)

2. Wink, Delay, or Immediate Start? (My guess is wink. That's what it's been for other PRI's I've done.)

Thanks!

------------------

| Signal Communication Systems - Fresno, CA |

| Telephone Systems, Voicemail Syste... & Data Cabling - Central Valley, CA

DTMF and wink are both correct. Programming gets a little funky if you are not using all 23 B channels.

Those two settings are not programmable on the MICS, right? I don't remember seeing any place to change it. I'm assuming this is just how it is (which is fine with me).

They are doing a full 23B+D, so no trouble there.

------------------

| Signal Communication Systems - Fresno, CA |

| Telephone Systems, Voicemail Syste... & Data Cabling - Central Valley, CA