Three times in the past couple of days, the Operator console has show "Alarm 75". What does Alarm 75 mean?

We have just upgraded to PRI service from POTS and now our software is up to 6.1.

Alarm 75
1. Check the connection to your ISDN service provider.

Most likely ISDN is not solid, you are taking hits across the span. Check with your provider to make sure.
B.

post your email and I'll send you an alarm and event manuel pdf from Nortel

Thanks,

nojunk_allowed at hotmail.com

Replace " at " with @

test

Hey, crowtalks, I would love a copy of the alarm/event codes also.
[email protected].
Thanks.

If possible, could one of you guys send me a copy of the Nortel alarm and event manual? Thanks in advance!

[email protected]

I am also getting the Alarm 75 plus 42, 44, etc. My nortel guide shows Alarm codes 71 and then skips to #80 so I don't obviously have a full manual. Please send my way if you have one. Thanks! [email protected].

You can get the manual here, quite a nice site.

https://www.xxxxxxxxxxxxxxxxxxxxx

Please Bunny you know better. We can not promote illegal manual sites.

Do this privately.

I know this is an old thread, but I would love to have this manual. Feel free to email me at [email protected]

I know this is a really old thread, but I'm having issues with a nortel system and can't seem to find the codes anywhere.

If anyone could email them to [email protected] it would be greatly greatly appreciated.

Thanks in advance.

Edited to remove link, as posting links to other sites with "Installer" information is against the TOS for this forum.