Hello to all!!!!

I have just picked up a customer with a BCM 400.
They are using a external(but on site) VM server
with the Diolgic boards (4 ports)that emulate a 7324. Every 2 to 3 minutes the ports go out of service. This can be seen on the BCM side. Ports
going inactive them come back active. On the VM side
the ports show a hangup from the BCM. The inactive
of the ports do this even if there are NO activity
on the ports. I have checked all jacks and wiring.
Any ideas ?????

Have you tried plugging a digital set into the ports and see if they disable?

Thanks for replying clanier.

I have put a digital phone on one port and talked
on phone for aabout 10 minutes and it seem to work
ok. I was was just wondering if anyone else have seen this problem.