Hi guys

I have installed a Norstar CICS and have digital Phones and a door phone attached to it. When the phones rings in the internal calls or the door phone rings, we seem to get the same ring tone. Is it possible to configure the system to have different rings tones for the door phone than the internal calls?

thanks

Yes in the door phone configuration F9*4 you can change the tone to a chime.

Thanks i will test it

Hi Guys I have a Norstar 824 that lost programming, I was not the original installer.
They have a button on the 7310 & 7208 phones to answer the door. How do I set this back up to work. I had it ringing in on intercom but thats not right. It also had a different ring to it. I see now aux. boxes by the KSU. Help PLease.
Bart

This post is 6 months old please start a new one.