atcomsystems.ca/forum
Posted By: Keiper Communications StarTalk Flash Power Supply - 08/15/07 04:09 PM
Can anyone tell me where I can get a Power supply for a StarTalk Flash System with a Nortel Part number of NTAB2456.
Posted By: bcox Re: StarTalk Flash Power Supply - 08/15/07 04:14 PM
Most Norstar dealers should have these.
The Three That I normally get NorStar Equipment from can't find them.
Posted By: MooreTel Re: StarTalk Flash Power Supply - 08/15/07 04:56 PM
You can try Here

Dave
Posted By: rich30529 Re: StarTalk Flash Power Supply - 08/15/07 05:36 PM
I've got one around here somewhere. If you don't have any luck finding one, PM me. It's used but it works.
Thank you for all your help I have found one.
Posted By: Dr Norstar Re: StarTalk Flash Power Supply - 08/16/07 06:56 PM
It is the same PS for the Flash, ATA & RAD.
Posted By: TerryS Re: StarTalk Flash Power Supply - 09/03/07 03:07 PM
Are you sure about the RAD ??
Posted By: NTlayoff Re: StarTalk Flash Power Supply - 09/03/07 07:41 PM
Flash and ATA-2 have Model AD-4405C / Output is 24VAC 600ma.

FastRad has Model AD-9362 / Output is 9VDC 600ma.
Posted By: bcox Re: StarTalk Flash Power Supply - 09/04/07 03:50 AM
There was a model of RAD that used the ATA power supply. It's the FastRAD that uses a 9vdc power supply.
© Sundance Phone System Forums - VOIP & Cloud Phone Help