atcomsystems.ca/forum
Posted By: jimkinkler 7.0 to 7.0 xc - 09/05/07 06:06 AM
Need to upgrade to 7.0 xc. What steps need to be taken to make the transition without reprogramming the system??
Posted By: telemarv Re: 7.0 to 7.0 xc - 09/05/07 08:57 AM
Just swap the flash cards.

Always back up before any software upgrades.

If you are adding an expansion card, do the software FIRST.
Posted By: jimkinkler Re: 7.0 to 7.0 xc - 09/05/07 04:45 PM
thanks.
Posted By: jimkinkler Re: 7.0 to 7.0 xc - 09/10/07 03:35 PM
so 6 port fiber goes in after the upgrade, correct?
Can this be installed with main cabinet on or do I need to power down?
Posted By: rich30529 Re: 7.0 to 7.0 xc - 09/10/07 03:42 PM
Power down first.
Posted By: jimkinkler Re: 7.0 to 7.0 xc - 09/10/07 03:56 PM
thanks again
© Sundance Phone System Forums - VOIP & Cloud Phone Help