atcomsystems.ca/forum
Posted By: JWRacedog Non response from a Flash - 09/06/07 09:36 AM
Last week we moved a DR5 616 and a Flash (2 port/4 channel) with Rel 1 2.0.02 Feat Card. All went as expected except for the Flash. It would not come up. A 7310 works on both ports (Ex 34 & 35 -ports 15 & 16. F983 has no response---nor do any of the F98_ feature codes. We replaced the unit, temporarily, with a Mini that we had as a test unit in our shop. It works at the location fine.

Back in our shop, I took the Flash apart and can find no physical problems that I can see.

The unit powers up but can't do anything else.

I replaced the Flash Card with Rel 03, but with the same results.

I have checked the Cap--it's running about 4.6 volts.

I have shorted out the cap and again, tried to get a F98_ response---but so far, no luck.

I must be missing something. Any direction would be appreciated.
Posted By: luv2ski Re: Non response from a Flash - 09/06/07 09:45 AM
try i believe feature 903 and follow the upgrade procedure

After the Startalk boots up perform f 903
hit ok to high range
f 983 enter the password and press OK.
at key Press OK
at sys (password)press OK

Feature 983 can now be accessed with the System Coordinator password .

(Please don't post passwords...send a PM instead)
© Sundance Phone System Forums - VOIP & Cloud Phone Help