atcomsystems.ca/forum
Posted By: BizTel MICS Line Problem - 09/18/07 01:38 PM
I have a cst. w/ a MICS 5.0, 1 line card, At times all the lines lite up and no one is on phone, this started a few wks ago and is happening more often now, the lines will stay lit for 30-45 mins at a time, when i was there, lines 2&4 were lit and no one was on phone, when i hit lines it just said in use, didnt say by who, Recpt. says she has hit lines when they are all lit and nothing, not even in use. I did not have a line card to swap out.
Has anyone had this problem and know what it is? is it a line card or MB?
Thank You in advance for any help
Posted By: MooreTel Re: MICS Line Problem - 09/18/07 01:42 PM
By chance is there a VM attached that could be tying up the line(s)?

Dave
Posted By: BizTel Re: MICS Line Problem - 09/18/07 01:53 PM
there is a flash 2 so it wouldnt tie up all 4 lines, also pressing lit line would show v/m port is using line
Posted By: jacktel Re: MICS Line Problem - 09/18/07 01:56 PM
Disconnect supervision [lines]is set for?
Posted By: BizTel Re: MICS Line Problem - 09/18/07 02:00 PM
yes, system has been working fine for yrs, this just started and i know no one has been in programming as i am the only one who knows it
Posted By: BizTel Re: MICS Line Problem - 09/18/07 02:13 PM
Also, all 4 lines lite up at once
Posted By: jimkinkler Re: MICS Line Problem - 09/18/07 02:31 PM
monitor the lines with a butt set on the frame and see what you hear
Posted By: jacktel Re: MICS Line Problem - 09/18/07 03:26 PM
who are lines from?Are they pots?,channel bank?Has customer switched vender?Ls/Ds cards are cheap.
Posted By: BizTel Re: MICS Line Problem - 09/18/07 04:31 PM
POTS - ls/ds cards, just never had one do this
Posted By: BizTel Re: MICS Line Problem - 09/19/07 09:35 PM
I reset system the other day, hasnt happened since ( when i say reset, mean just powered down for a min) very odd, any comments? cpu over run? something odd like that?
Posted By: BizTel Re: MICS Line Problem - 10/03/07 04:06 PM
Did it again, replaced system to test and still doing it, Telco does not have D/S on lines
© Sundance Phone System Forums - VOIP & Cloud Phone Help