I trying to get a remote backup of an Option 11c...however when I dialup, get my connection, query LD 143 and do XBK...input my info...the connection comes back with message: BKP0008 which is transmission error and CCBR0001 invalid command. I suspect maybe my modem settings for the modem connected to the TTY might be wrong...any ideas. I know the modem connection is good because I can do everything else I need to....just not a remote backup. I am using a Robotics 33.6 faxmodem

are you on tty 0??

Dip Switches

#1 Down data terminal ready override
#2 Up verbal results code
#3 Up suppress results code
#4 Down no echo, offline commands
#5 Up auto answer first ring or higher if NVRAM requires
#6 Up carrier defect normal
#7 Up load NVRAM defaults
#8 Down dumb mode
Equipment used:
US ROBOTICS
Model: 0701
Sportster Fax/Modem
33.6
8 dip switches on the back for configuration of the modem

Also make sure that the protocol is set to X MODEM