Have an old 8x24 with 5.1 software.
They have a 12x0 module.
Can ANY Caller ID cards be installed in this 12x0 and work? or does it need a specific rev level to work in this old 12x0 ???
Thinking about moving all lines to the 12x0 with Caller ID cards, instead of trying to locate an expensive c8 unit.

Thanks.

with the 8x24 dont you just get caller id on 1 station with lines set to appear and ring unless its going thru v/m ,try it let us know the results

Yes, sentrex1, that is correct that you get it only on one station per line.
But you have to have the cards to get it.
I just want to know if ANY card will do, even the newest cards, or does it have to have an old revision card????

Jim, yes any CLID card will work and as Sentrex stated as far as who gets it, or once it's transferred either from AA/CCR or from the CLID set for that line.

Thanks, Dave, I haven't done any caller ID on the OLD 8x24's so just wanted to get the right card if that is what they want to do.