Client has ordered a partial PRI, where only the first 10 channels function. Where do we program so that inbound and outbound only hunt the first 10 channels to match the PRI set up from the Telco?
Thanks,
Please fill out your profile so we know who we are helping out.
Thanks for understanding.
Your profile has not been filled out.
"Report a Post" is not used to alert the Mods that you have posted something, it's to alert us that someone else has posted something improper and needs out attention ASAP.
Profile updated.
Also, our MICS is already installed with a full pRI and the client is scaling back to 10 channels. We tried the programming and the outbound call set up failed in that we could not get the outcalling to hunt only the first 10 channels. Is it possible that we have to perform a system reset, system reinitialize in order for this programming to take effect?
Thanks,
Are those 10 channels from 23rd down or from 1st up? depends on that set up Ascending order or Descending order and pull out non used channels out of PRI-A pool.
Under Maintenance, Link Status, disable channels 11 thru 23.
thank you.
When programming this, will it be necessary to perform a reset or system reinitialization in order for this programming to take effect?
LR
Sorry, also, the unused channels are from the 23rd down.
tnx,
LR