sundance-communications.com
Posted By: bditech BCM 400 problem is getting outside dial tone - 11/20/08 06:32 AM
I cant program numbers under buttons cause when program the 9 for outside pool line nothing happens. Also push intercom and dial a 9 no dial tone. Have checked the lines are in pool A and the set is set to pool A. What have i missed.
Thank You
You need to give a lot more specific info.
Have you checked the line - do they have dial tone?
What lines # are in the line pool A? Do you have any in pool A that you are not using and are dead?

What does the display say when you press intercom 9??
Have you programmed 9 to pool A
dan isnt that where pool A is already assign 9 at default?
NT yes all lines have dial tone on them. All lines are in pool A.
Quote
Originally posted by bditech:
dan isnt that where pool A is already assign 9 at default?...
Nope, notta....you have to assign a line pool code.
Quote
Originally posted by bditech:
..........NT yes all lines have dial tone on them. All lines are in pool A.
That was 10% of the question. The 90% of the question is, do you have lines in Line Pool A that you are not using???

My question from before still holds:
What does the display show when you dial a 9??
thanks guys I assign but wouldnt let me assign 9 had to use 8 and it works great.
Thanks to all.
© Business Phone System Forums