atcomsystems.ca/forum
Posted By: lroldan Voicemail not recognizing DTMF tones - 10/16/09 02:48 PM
I have come across a situation twice now that I'd like to see if anyone else has experienced. This has only been with the service provider Telepacific (here in CA.) and their product called Smartvoice PRI. This product is a PRI but is some sort of SIP trunk in their network. I have now seen this happen at 2 different locations with 2 different customers of mine; when a call is answered by auto attendant and the caller tries to (a)use the company directory,(b) tries to access their own voicemail the Call Pilot does not recognize the DTMF tones and the caller hears the message "No Matches Found" or "The Mailbox Password Combination You Have Entered Is Not Registered" indicating that the DTMF tones are not being recognized. Now in both instances these features worked prior to these customers switching to this product of Telepacific's. The carrier has determined that there is a problem with the digit delivery and has aked that we reduce the digit delivery timer in the voicemail so that the digits will be recognized. Has anyone else experienced this yet or am I the only one so far? One thing to note is that my first customer has an old NAM 4.0 and the 2nd customer has a Call Pilot 100 3.1 and both experience the exact same thing. I've worked on Norstars for years and do not know of any "digit delivery timer" on the voicemail products. Any thoughts?
Posted By: Curlycord Re: Voicemail not recognizing DTMF tones - 10/16/09 02:56 PM
Does it work fine on a regular PRI or copper trunks?
Posted By: jwooten Re: Voicemail not recognizing DTMF tones - 10/16/09 03:11 PM
If a caller can dial any extension but cannot open a mailbox or directory sounds like your carrier is not sending the "*" or "#".
Sounds like your Telco is using compression on your PRI. They do that to conserve bandwidth.
Posted By: CSS_ETS04 Re: Voicemail not recognizing DTMF tones - 11/24/09 03:41 AM
Try to run a DCH trace on the PRI channel and collect the digits punched on the call by the external user..

If there could be aany mismatch in the digits dialled update the same to the service provider
Posted By: CSS_ETS04 Re: Voicemail not recognizing DTMF tones - 11/24/09 03:42 AM
Are u facing this problem when a call is dialed from a specific service provider or with all the calls routed via the specified PRI
Posted By: russell4444 Re: Voicemail not recognizing DTMF tones - 12/26/09 08:46 AM
Depending on the carrier used to place the call into the system, I've had this issue with AT&T cell phones for years. LG cell phones seem to work fine, but not other brands. This is on an 8X24 DR5
with StarTalk VM. It is very intermittent. It was not the equipment causing it.
Posted By: Danny_Ocean Re: Voicemail not recognizing DTMF tones - 12/26/09 09:07 AM
Sounds similar to my issue:

https://www.sundance-communications.com/forum/ultimatebb.php?/ubb/get_topic/f/8/t/005000.html
© Sundance Business VOIP Telephone Help